Hi friends, recently I have seen some program related to the laughing tips and the benefits of the laughing. Actually laughing is very good for health and provide some good effects on your body, like it turns the body reactions in positive direction, actually it is hard to understand you because these thing can understand by a science student perfectly. But I will tell you there are two mode in which out body works. In first the body reacts positively and our body reaction works positively as our blood pressure goes to constant rate our immune system works properly and in second phase the body works in negative sense our mind feels tired and our blood pressure goes low and body produce negative feeling. Laughing, medication, yoga these are the module of the exercise for keeping our body fit and fine.

 Laughing is also good for blood, our blood circulation remains better and better when you laughs. So, I hope after reading this post you try to become happy and laugh whenever you got the chance. 

Feelings are the mirrors of events happening with you, that is why do not try to stop your feeling, always explore your feelings when you get the chance.  Suppose you are sad and you are not showing it then it will make you more tense, but if you express those feeling than you feel relax and better than past,  When you are happy and then if you are sharing with other people they might be your relatives or your friend, you will get more joy and some more reason to get happy.

So do not simulate your emotions.

All that is of course possible with the iPhone. Sometimes though you will want to listen to music or watch a movie and it may be more appropriate to wear headphones as you do so you aren't disturbing others around you. You do need to be very careful about which headphones you choose though as picking the wrong ones could completely ruin your enjoyment.

Up until recently there were only a few choices available when it came to choosing a pair of headphones for a portable audio device. Many people didn't even know they had as much choice as they had. In more recent times the technology behind headphones has moved on. You can now get headphones that vibrate along to the bass music in order to reduce the effect of background noise allowing to listen to your music more clearly. If you search on the internet for headphones you now head such a wide choice to select from that it can be difficult to know which ones you should pick for use with your iPhone.

You could do a lot worse than opt for the V-Moda Vibe Duo headphones. These are renowned for being top of the range luxury headphones. You will be able to enjoy your music in perfect clarity when you are using these. They are of the inner ear design so are very comfortable to wear and give superb sound quality. No longer do you need to carry a large, bulky set of headphones around with you. They also look great too with a minimalist all metal design.

Another good thing about these headphones is that they have a call/music control system. If you're in the middle of a song and you receive a phone call you can easily switch between using the built in microphone to speak to whoever is calling and then switch back to the song you were listening to at the touch of a button.

These headphones really do produce amazing sound quality thanks to the integrated noise cancelling BLISS system that is built into them. Unlike a lot of noise cancelling headphones these do not require any batteries or other sources of power to work so you won't be getting annoyed with the batteries constantly running out when you need them the most.

BLISS gives you high sound quality and almost completely eliminates any background noise. The bass produced from these headphones is also something else. If you are a music lover and enjoy listening to your music played to you at a very high quality then you really should take a closer look at the V-Moda Vibe Duo headphones.

Electrocution

For those seasoned electronic repairers you may find this topic as “easy to handle” due to you already exposed to it every single day. That means you already knew all the consequences of when someone got electrocuted. You will take extra careful when dealing with AC supply and know what to do when performing the voltage test on board. Now for those newbieâ€&trade ;s that has just joined this field, I highly recommend you to get an isolation transformer in order to protect yourself from electrocution just in case if anything bad incident happen. I remembered one bad incident happen 10 over years ago where my left hand was slightly burnt due to my hand accidentally touched on the live AC supply. Back then I’ve never heard of what is isolation transformer and my college never emphasis on this subject. I don’t want you to be like me fall into the same bad incident! Treat every AC supply carefully and if you don’t understand, you can always get a repair friend to help you out.

Isolation transformer offer 100% isolation from the AC input line. Even if you are a seasoned electronic repairer, I suggest you to get one too. The isolation transformer shown in the photo has a rating of 1KVA which is equivalent to about 600 Watt and it is a customized isolation transformer. You can easily get a ready made one from your local electronic distributor. For more information about isolation transformer, you can always check from the internet.

Capacitor Discharge

This big filter capacitor (usually rated at 100 uf to 470 uf with 400 to 450 working voltage) in the primary side of power supply is also a potential hazard to electronic repairers. I myself had been discharged by this capacitor before and it really hurt. The mistake that I made was in my mind says that “the voltage will discharge by itself”. Yes it is true only to certain designs and in some designs even though you already switched off the power supply; the charge was still remain in the capacitor. If the start up resistors is open circuit the voltage inside the capacitor can’t be discharged and if possible you have to confirm it with a multimeter. If it reads zero or low voltage then only you begin to work in this area. Due to few times that I made the mistake, I’m now more alert about this area. So newbieâ€&trade ;s you got to be well prepared when troubleshooting this area.

Static Charge A static charge may be built up when two surfaces rub against each other. In our normal activities, we generate static charge all the time. This charge can have a voltage high enough (may be thousands of volts) to create quite a spark. Even though the voltage is high, the current is very low, so only a small amount of power is involved. Static is always a problem when you are repairing and troubleshooting electronic equipment. You must take special precautions whenever you repair any equipment that have CMOS IC’s in it. Before you touch any parts inside the equipment, always ground yourself to remove of any static charge. Many service technicians and engineers wear a wrist strap which is connected to ground through a one mega ohm resistor. This will safely drains off any static electric charges from their body. Look at the photo and you could clearly see a wrist strap attached to his left hand. If you deal with motherboard repair, hard disk, FET components and etc, it is recommended to get a wrist strap before the static charge kills the electronic components.

Tiredness

In doing any repair work one must have the concentration and focus so that the task can be accomplished. If you are tired or weak please take some rest as forcing yourself may invite more problems than you can solve. We as electronic repairers is dealing with electricity and if one mistake (got electrocuted) made we may end up in hospital or even dead. Take a short nap when you are tired. With just 5 to 10 minutes nap, it could refresh your mind and may last you till end of the day. Our mind easily gets tired if we are too concentrating in tackling a problem for a long time. Have a short break and many times during the short break, ideas came and I can easily solve the problem fast.

Transistor/Diode replacement

I believe many of you have come across problem where we could not locate original part number for diodes and transistors. Due to this we used the substitution part number hopefully it will work like the original one. The most common components that have substitution part number are transistors and diodes. For you information, you can get easily get the original value from the market for capacitors, resistors, zener diodes and etc. If you are a TV/Monitor repairer, you must have used substitution part number before for the horizontal output transistor (HOT) and for diodes in the secondary output side.

The mistake made by the electronic repairers was not enough time to run the burn in test for the equipment that used the substitution part number. That means, if you don’t properly test the equipment after installing the substitute part, the customer may complaint again after using the set for few days. What you need to do is to fully test the set before sending the equipment back to customer in order to avoid call back.

If you repair a CRT Monitor and you had replaced the HOT with another part number, the best thing to do next is to run the Monitor on all resolution and make sure the HOT temperature is okay and won’t burn your finger when you touch it. If it extremely hot, then you have to be careful as the set may not last long and may come back again for second repair if you insist to send the set back to customer. Try another part number and if possible get back the original part number for longer lasting operation.

Don’t burn in test any electronic equipment without supervision.

I’m saying it again “Don&a circ;€™t burn in test any electronic equipment without supervisionâ€� �. Why did I mention it two times? It is because if any electronic equipment left unattended (no supervision) for a 24 hours burn in test, if something goes wrong with the electronic circuit, the equipment may caught fire and it can burn down the whole office and etc. I always have some extinguisher standby in my technical department and just in case if there is a fire we can put the fire off in the shortest time. I won’t let the equipment that I have repaired to run without anyone in the technical department. We do not know how reliable and how good an equipment design is (there are so many unreliable or cheap equipment in the market) thus we got to take notice about this matter.

Inform the customer about the repair charges first

If you are in the electronic repairing business, one of the most important things that you need to do is to inform the customer first about the charges of the repair otherwise you may end up quarrelling with the customer over the price charged and lose the customer. Your business may be affected and tarnished if the customer spread around about the nightmare incident in your company. In order to avoid argument, write a black and white letter and sent/fax it to your customer, once they agreed then only proceed to repair the equipment. Although this subject (about charging customers) is a bit subjective, I believe you can sort it out handle it in a professional manner.

Laser warning

If you are dealing with equipment that uses laser diode such as laser jet printer scanner assembly, CD Rom, DVD, VCD, and other laser related equipment, you must abide the warning of the laser in the equipment you are troubleshooting. Ignorance can bring disastrous to your vision especially your bare eyes are directly exposed to laser ray without you knowing it. Study all the safety rules about handling laser equipment and how to avoid your eyes being exposed to the laser ray and at the same time you can perform the troubleshooting and the repairing job.

Not having the right equipment

I came across lots of technicians that only use an analogue meter to do the electronic troubleshooting work. They don’t even have a digital meter! To them an analogue meter is already adequate but in actual fact they have missed out something good in their life. I know that sometimes it is hard to convince these technicians to accept new things in their daily routine work but the changes that the new technology have brought really can make someone to save their troubleshooting time. Example, the time before end of the 90’s, many electronic repairers test electrolytic capacitors either with the help of analogue or from a digital capacitance meter. Do you know that both meters of testing the electrolytic capacitor can mislead you into believing that a bad capacitor is good. Your precious repair times were wasted and at the end you can’t find out the culprit. We need different type of meters to tackle different type of problem or components. By using only one or two meters, you are only limiting yourself to quickly find out the fault fast. If you don’t have any ESR meter and wish to get one you may click here.

Don’t modify the X-ray protection circuit

If you are repairing the CRT TV/Monitor, I’m sure you have come across before the problem where the set shutdown once the power is turned “On&ac irc;€. There must be some reasons or a defective component or circuit that make the equipment to shutdown. Some call it as “High Voltage Shutdown”. The equipment shutdown by itself was due to high voltage (24 KV) suddenly shot up. A bad flyback transformer, increased in B+ voltage, open circuit in holddown/safety capacitor and some other reasons can cause the set to shutdown. The x-ray protection circuit was designed in the TV/Monitor circuit in order to detect any abnormal high voltage present in the equipment. If there is no x-ray protection circuit in the equipment, the high voltage may shoot up to 30 over Kilo Volts and the X-ray produced will be very harmful to the user.

Now your job is to find out the cause of the problem and please do not take any short cut in modifying and defeating the purpose of this sensitive circuit. If not the user will be exposed to X-ray emission without him or her knowing it. A prolong exposure of such dangerous ray could cause cancer in their body. If you can’t repair the problem juts send the set back to the customer or send it to the distributor for repair. Please think of the consequences before you defeat the original purpose of a circuit in any electronic equipment.

I believe there are more than 10 mistakes that you should avoid but with this information, you should by now know how to handle each mistake and be a good and a successful electronic repairer.

Do you want to get vacation in New York or maybe see a cosplay con there? I found New York City Sightseeing. They give us all that wee need to get a tour at New York. You will able to book Double Decker & Bus Tours, Combos package and also Boat & Helicopter. is that amazing! They also provide New York City Attractions also Day Trips.Not only that. They also provide online ticket order. You can read all detailed information at FAQ. But after you buy your ticket, I suggest you use it fast since it will expired in 48 hours.

I am going to now say something about New York Tours which is used to operate a fleet of double decker and luxury buses for travelling around New York.It is a travel sight seeing guide company and helps you to visit the favourite destinations in and around Manhattan and also helps you to visit other attractive centers.What is special with them and really worth to tie up with them is the crusie ride and the helicopter ride around Manhattan are their specality.Apart from New York city sightseeing they also offer and operate day time road trip on the buses to Philadelphia,Boston and also other nearby and important cities.The company is one of the largest in the United States who are concerned about ground transport and also they are the best in the business for leisure and corporate trips.They also strive to provide a quality and customer satisfaction.These are the main mottos of this company and you can travel around New York with the fairest price possible.Just visit this site for more information.

HELLO, friends yesterday I was hearing about the AIDS spreading around the world, this is really a dangerous situation because the cure of this disease is really not possible after a stage and until 1 year back there is no cure. So it is really dangerous so if you are in some kind of relation like this.

Parents are the god of the child. They provide every  thing for the children for which they are looking for. So when children grow up they also take some good care of the parents because after some time they also going to be parents. And if they do not care their parents and take them lightly, it may happen that their children will behave same as, as they behave with their parents.

Conversation between a software engineer and his wife :-

When I was in high school I spent a lot of time imitating bad writers. What we studied in English classes was mostly fiction, so I assumed that was the highest form of writing. Mistake number one. The stories that seemed to be most admired were ones in which people suffered in complicated ways. Anything funny or gripping was ipso facto suspect, unless it was old enough to be hard to understand, like Shakespeare or Chaucer. Mistake number two. The ideal medium seemed the short story, which I've since learned had quite a brief life, roughly coincident with the peak of magazine publishing. But since their size made them perfect for use in high school classes, we read a lot of them, which gave us the impression the short story was flourishing. Mistake number three. And because they were so short, nothing really had to happen; you could just show a randomly truncated slice of life, and that was considered advanced. Mistake number four. The result was that I wrote a lot of stories in which nothing happened except that someone was unhappy in a way that seemed deep.

For most of college I was a philosophy major. I was very impressed by the papers published in philosophy journals. They were so beautifully typeset, and their tone was just captivating—alterna tely casual and buffer-overflowingly technical. A fellow would be walking along a street and suddenly modality qua modality would spring upon him. I didn't ever quite understand these papers, but I figured I'd get around to that later, when I had time to reread them more closely. In the meantime I tried my best to imitate them. This was, I can now see, a doomed undertaking, because they weren't really saying anything. No philosopher ever refuted another, for example, because no one said anything definite enough to refute. Needless to say, my imitations didn't say anything either.

In grad school I was still wasting time imitating the wrong things. There was then a fashionable type of program called an expert system, at the core of which was something called an inference engine. I looked at what these things did and thought "I could write that in a thousand lines of code." And yet eminent professors were writing books about them, and startups were selling them for a year's salary a copy. What an opportunity, I thought; these impressive things seem easy to me; I must be pretty sharp. Wrong. It was simply a fad. The books the professors wrote about expert systems are now ignored. They were not even on a path to anything interesting. And the customers paying so much for them were largely the same government agencies that paid thousands for screwdrivers and toilet seats.

How do you avoid copying the wrong things? Copy only what you genuinely like. That would have saved me in all three cases. I didn't enjoy the short stories we had to read in English classes; I didn't learn anything from philosophy papers; I didn't use expert systems myself. I believed these things were good because they were admired.

It can be hard to separate the things you like from the things you're impressed with. One trick is to ignore presentation. Whenever I see a painting impressively hung in a museum, I ask myself: how much would I pay for this if I found it at a garage sale, dirty and frameless, and with no idea who painted it? If you walk around a museum trying this experiment, you'll find you get some truly startling results. Don't ignore this data point just because it's an outlier.

Another way to figure out what you like is to look at what you enjoy as guilty pleasures. Many things people like, especially if they're young and ambitious, they like largely for the feeling of virtue in liking them. 99% of people reading Ulysses are thinking "I'm reading Ulysses" as they do it. A guilty pleasure is at least a pure one. What do you read when you don't feel up to being virtuous? What kind of book do you read and feel sad that there's only half of it left, instead of being impressed that you're half way through? That's what you really like.

Even when you find genuinely good things to copy, there's another pitfall to be avoided. Be careful to copy what makes them good, rather than their flaws. It's easy to be drawn into imitating flaws, because they're easier to see, and of course easier to copy too. For example, most painters in the eighteenth and nineteenth centuries used brownish colors. They were imitating the great painters of the Renaissance, whose paintings by that time were brown with dirt. Those paintings have since been cleaned, revealing brilliant colors; their imitators are of course still brown.

It was painting, incidentally, that cured me of copying the wrong things. Halfway through grad school I decided I wanted to try being a painter, and the art world was so manifestly corrupt that it snapped the leash of credulity. These people made philosophy professors seem as scrupulous as mathematicians. It was so clearly a choice of doing good work xor being an insider that I was forced to see the distinction. It's there to some degree in almost every field, but I had till then managed to avoid facing it.

That was one of the most valuable things I learned from painting: you have to figure out for yourself what's good. You can't trust authorities. They'll lie to you on this one.